Greases and Lubrication Products  Page:  1  -  2    Next  

Automatic Lubricant Greaser

 

 

lubesitetest.jpg                                           


    TESTIMONY

SWITCHING  from Manual  to Automatic lubrication has greased the way for Maintenance Managers at a Midwest waste Water Treatment Plant to increase efficiency,improve safety and SAVEMONEY!!

Ball bearings at the ann Arbor , Mi. Waste water Treatment Plant requires precise and frequent lubrication. Formerly, maintenance crews climbed on ladders and sometimes directly onto machines to manually apply grease evey 24 hours.

This method proved to be inefficient,costly and dangerous to workers..

 

Using our automatic Lubricators has resolved their greatest problem over lubrication.

The say their biggest bonus though has been Safety for their Employees!! 

 

So , If your facility has taken a stance on Safety for their employees or Saving Money ; 


This is a Package of 5 Automatic Lubricators

 

 

CALL YOUR SPECIALTY LUBRICATON CONSULTANT FOR AN EXPERT LUBRICATION SYSTEM SET UP OR FOR SINGLE OR MULTIPLE PACKAGES

951-538-3247

OR EMAIL INFO@WINNERCHEMICALS.COM

 

 

 

Item #sprodautlubKIT

Price: $350.00  Sale price $250.00

Click for details

Food Grade Grease

Heavy duty food  is water resistant.Has excellent adhesion and cohesion. Resists throw off.
Operating temperature range  0-450 degrees farenheit.


Used in:Bakeries,bottlers, water districts, breweries,canneries,dairies,edible chemical manufacturing,egg processors, meat and poultry processors.
Excellent in areas like golf course etc. where grease stains are an issue.

Item #430aeb

Price $250.00 

Click for details

Food Grade High Temperature Grease

Winner High Temperature Food Grade Grease

Description: Case 50 Cartridges

Multipurpose  high temperature grease: -75 degrees to 550 degrees

 

NSF/USDA H1

Registered and  AND KOSHER Approved

 

Some Typical Applications Include but are not limited to:

Freezer bearings, oven bearings, packaging machines, chains, pumps, kilns, conveyors, food , bottling and water etc.

 

Advantages: Non-Staining, water and steam resistant and  wide temperature range etc.

 

Package Availability

Cartridges,1 gal pails, 5 gal  pails ,15 gal kegs  and 55 gallon drums

 

Reorder:

Toll Free:1-877-597-6261

Facimile: 909-886-9010

Email: sales@winnerchemicals.com

Website ordering :www.n2winnerchemicalcom

Item #Sprodlubhtfmg

Price: $950.00  Sale price $895.00

Click for details

HVAC BLACK GREASE BOX

HVAC BLACK grease was developed especially for Air condition Mechanics: For air handlers,bearings and high speed/medium speed motors etc

Performs well at temperatures up to 500 degrees!

 

HVAC BLACK  is a multi-use grease containing moly, high viscosity base oil and calcium sulfonate thickener system for hundreds of other applications like automotive, marine, industrial and agricultural applications.

Extreme pressure additives provide resistance to shock. Forms a protective film, resisting rust and corrosion. Resists chemical breakdown and oxidation.

 

This water resistant lubricant will not wash out, and is resistant to corrosive salt water environments.

 

Meets and exceeds the demanding automotive and industrial testing requirements of ASTM D 4950, earning it the GC-LB classification by the National Lubricating Grease Institute. This grease also meets Caterpillar CAT 5% moly requirements.

Recommended for the most severe applications in off-highway construction, mining equipment, earth moving machines, Caterpillar equipment, as well as other heavy duty construction and mining equipment moving at slow to medium speed

 

1 box 10 tubes

Item #LUBHVACBLACKBX

Price: $150.00  Sale price $120.00

Click for details

HVAC BLACK GREASE CASE

HVAC BLACK grease was developed especially for Air condition Mechanics: For air handlers,bearings and high speed/medium speed motors etc

Performs well at temperatures up to 500 degrees!

 

HVAC BLACK  is a multi-use grease containing moly, high viscosity base oil and calcium sulfonate thickener system for hundreds of other applications like automotive, marine, industrial and agricultural applications.

Extreme pressure additives provide resistance to shock. Forms a protective film, resisting rust and corrosion. Resists chemical breakdown and oxidation.

 

This water resistant lubricant will not wash out, and is resistant to corrosive salt water environments.

 

Meets and exceeds the demanding automotive and industrial testing requirements of ASTM D 4950, earning it the GC-LB classification by the National Lubricating Grease Institute. This grease also meets Caterpillar CAT 5% moly requirements.

Recommended for the most severe applications in off-highway construction, mining equipment, earth moving machines, Caterpillar equipment, as well as other heavy duty construction and mining equipment moving at slow to medium speed

 

1 CASE 30 tubes (SAVE $10 OFF BOX PRICE)

Item #LUBHVACBLACKCS

Price: $400.00  Sale price $350.00

Click for details

Invisible Lube

Invisilube is clear,high tack,water resistant,multi temperature lubricant that is effective at temperatures ranging from -30 to 600 degrees farenheit.

This product sprays out as a liquid penetrant to get into hard to reach areas.Invisilube then rapidly sets up into a tenacious lubricating film.

 Use on conveyors,winches,chains,glass, hinges,sprockets,cables and rollers etc.


Where:Air conditioning, Machine Shops,Schools, Hospitals,Plastic Industry, Wheel Chairs, Locckers,WindowsHinges, Door Hinges, Gym Equipment,Bicycles, Outboard/Inboard Motors,Salt Spreaders, Saanitation Dept Vehicles,Sweepers, Automotive,Bus Lines,Scrubbing Machines,Cab Fleetsand Bus Fleets etc.,
PACKED IN A BOX OF 12 AEROSOLS
CLICK DETAILS FOR MSDS

Item #521AE

Price: $195.00  Sale price $180.00

Click for details

INVISILUBE GREASE

INVISILUBE FOOD GRADE GREASE

DESCRIPTION
PACKAGED IN A 60 TUBE CASE

Invisilube is a multi-service, non-melting, waterproof grease fortified with PTFE. It is designed specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions. Invisilube with its excellent film strength and extreme pressure qualities, forms a tough durable film of lubrication that prevents metal to metal contact. Invisilube is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1*Registered and KOSHER approved, which gives it full acceptability for use in ALL areas where incidental food or potable water contact may occur.

USAGE

Invisilube with its waterproof and chemical resistant capabilities is an excellent lubricant on all sliding surfaces and slow to high speed bearings, operating in adverse conditions. Because of its pure synthetic base, high load carrying capacity and wear protection characteristics, Invisilube is far superior than petroleum, white oil based greases on the market today. This makes Invisilube a truly multi-service grease in both food grade and non food grade applications operating in temperatures from -10E F to 400EF. Due to its NSF/U.S.D.A. H-1 *Registration, Invisilube is an excellent choice for both Food Processing plants, where equipment wash down is an everyday requirement and Water Industries, where contamination of conventional petroleum lubricants is a primary environmental concern. Invisilube is compatible with most rubbers and plastics and is a superior lubricant for "O" rings. Some of its diversified uses include:

M PUMP BEARINGS M STERILIZER CHAINS

M BUSHINGS M SLIDES AND WAYS

M CAN SEAMERS M POOL EQUIPMENT

M VALVES M ELECTRIC MOTORS

M GASKETS AND "O" RINGS M WATER FILTERS

M CONVEYORS M UNIVERSAL JOINTS

ADVANTAGES

M NSF/U.S.D.A. H-1 *Registration M CHEMICAL RESISTANT

M WATERPROOF M NON STAINING

M NON-MELTING M WIDE TEMPERATURE RANGE

M CONTAINS PTFE M REDUCES WEAR

M KOSHER APPROVED M PREVENTS RUST & CORROSION

NSF H-1 Registration No. 059323


TYPICAL SPECIFICATIONS

DESCRIPTION WINNER / Invisilube

Color: CLEAR

Base Oil: Synthetic

Thickener: Synthetic

Texture: Smooth & Tenacious

Base Solid: PTFE

NSF/U.S.D.A. Rating: H-1

TEST METHOD ASTM TEST RESULTS

N.L.G.I. Grade ----- 2

Worked Penetration D-217

60 Strokes 280

10,000 Strokes 290

Base Oil Viscosity, D-445

cSt @ 40EC 290

cSt @ 100EC 42

Pour Point, EF D-97 -10

Flash Point, EF D-92 400

Dropping Point, EF D-566 NONE

Conradson Carbon, % D-189 .001

Evaporation Loss, % D-972 1.5

(10 hours @ 210EF)

Corrosion Preventative Test D-1743 PASS

Water Washout, % Loss D-1264 1.9

Timken OK Load, lbs. D-2509 35

4-Ball Wear Scar, mm D-2266 0.50

(40 Kg, 1 hr. @ 1200 rpm, 167EF)

Dielectric Strength, KV D-877 30

WGK (German Water Classification) ------ 0

PACKAGE AVAILABILITY

Convenient disposable gun loader 14 oz. Cartridges

5-gal. Pail, 15-gal. Keg and 55-gal. Drum

Item #SPRODLUBINVIS

Sale price $1080.00

Click for details

LUBE SITE OILERS

CALL YOUR SPECIALTY LUBRICATON CONSULTANT FOR AN EXPERT LUBRICATION SYSTEM SET UP!

951-538-3247

OR EMAIL INFO@WINNERCHEMICALS.COM

Item #LUBEOILER

Price: $350.00  Sale price $250.00

Click for details

Moly Lube Chain and Cable Lubricant

Chain and cable lubricant  with Moly.

Penetrates into cables and chains ..

Protects against friction and wear..

Will not attract dust or dirt

Protects against rust and corrosion.

Great for rollers,pins and bushings...

Reduces chain whip,vibration and noise..

Item #581ae

Price: $175.00  Sale price $160.00

Click for details

RED STUFF MULTI PURPOSE NON MELT RED GREASE SPRAY
RED STUFF IS A MULTI PURPOSE NON MELT RED GREASE SPRAY.PRODUCT SPRAYS OUT AS A THICK LIQUID AND QUICKLY TRANSFORMS INTO A GREASE IN 1-2 MINUTES WHICH ALLOWS IT LUBRICATE HARD TO REACH PLACES.CURED LUBRICANT WITHSTANDS HEATS TO 500 DEGREES F.
RED STUFF IS RESISTANT TO WATER,ACIDS,ALKALIS,HIGH PRESSURE AND IS HIGHLY RUST RESISTANT.USE ON:  CHAINS,WINCHES,CONVEYORS, GEARS, CABLES,TOOLS,HINGES,BUSHINGS,PINS,LEVER AND ROLLERS ETC.

RED STUFF IS PACKAGED IN A CASE OF 24 AEROSOLS PER BOX.

click details for MSDS
Item #701ae

Sale price $300.00

Click for details

SLIDE EASY DRY LUBRICANT

SLIDE EASY

DRY SILICONE SPRAY—FOOD GR

DESCRIPTION

SLIDE EASY Dry Silicone Spray Food Grade is designed to lubricate equipment used in the packaging and processing industry. Slide EASY

leaves a nonstaining, dry, pure silicone film to lubricate moving parts, reducing friction and wear. Slide Easy is heat stable from -450°F to

450°F. Also formulated as a release agent on seals and gaskets of tank closures. Lubricates all sliding surfaces except those you wish

to paint. Excellent on RV slide outs. Use on sticking metal, wood, rubber and plastic. Apply to cutting tables, conveyors, heat sealing

equipment and slicing equipment. Waterproofs leather, canvas, rubber and chrome surfaces. Safe on all plastics. Contains no methylene

chloride. Won’t melt, freeze, gum or become rancid.

APPLICATIONS

An excellent product for food processing plants, restaurants, apparel and accessory manufacturing, tank closure seals, plastic products,

RV dealers, hotels/motels, machine shops, homes, service hinges, RV slide outs, auto/RV repair shops and institutions. Windows, locks ,curtains hinges,guns etc.

FEATURES & BENEFITS

• Concentrated. A little Slide Easy  goes a long way.

• Reduces friction between moving parts even for metal-to-metal contact surfaces. Parts last longer.

• Clean, dry spray does not leave a sticky residue behind.

Item #765AEB

Price: $175.00  Sale price $150.00

Click for details

STOCK RPM AIR TOOL CLEANER AND LUBRICANT

RPM AIR TOOL CLEANER AND LUBRICANT IS IDEAL FOR AIR OPERATED TOOLS,JACKHAMMERS,DRILLS,SAWS,IMPACT WRENCHES,SANDERS,POLISHERS,GRINDERS AND AIR OPERATED MOTORS.RPM RECONNDITIONS,CLEANS,ELIMNATES MOISTURE,PREVENTS RUST AND

CORROSION .

Specially designed to penetrate to air tool lubrication points, clean away rust and operating debris, displace moisture, remove calcification, and lubricate to restore optimum tool performance. Actually breaks down and removes build-up from internal air motor parts allowing for increased air flow through the tool and system. With only one application into the air connection, more efficient operation of the equipment will be noticed immediately. Red color helps indicate when the build-up and contamination within the air tool has been flushed away. For use on drills, wrenches, sanders, buffers, and saws.



RPM WILL  ULTIMATELY EXTEND THE LIFE OF YOUR AIR TOOLS!

ONE $10.00 CAN WILL PRESERVE  20 /$400 TOOLS OR $8000 WORTH OF EQUIPMENT!



PACKAGED IN A BOX OF 12 AEROSOLS

Item #716AEB

Price: $175.00  Sale price $150.00

Click for details

WE GLADLY ACCEPT ALL OF YOUR MAJOR CREDIT CARDS ;INCLUDING VISA,MASTERCARD,DISCOVER ,PAYPAL AND AMERICAN EXPRESS.


AND FOR YOUR CONVENIENCE WE WILL PROCESS EMAIL ,FAX AND TELEPHONE ORDERS AS WELL.

EMAIL US AT:N2WINNERCHEMICAL@AOL.COM
FAX: 909-886-9010 
PHONE TOLL FREE: 1-877-597-6261

 Page:  1  -  2    Next