INVISILUBE FOOD GRADE GREASE
DESCRIPTION
PACKAGED IN A 50 TUBE CASE
Invisilube is a multi-service, non-melting, waterproof grease fortified with PTFE. It is designed
specifically to lubricate, seal out water, and resist chemical attack under the most demanding conditions. Invisilube
with its excellent film strength and extreme pressure qualities,
forms a tough durable film of lubrication that prevents metal to metal contact. Invisilube is a pure synthetic based lubricant that is NSF/U.S.D.A. H-1*Registered and KOSHER approved, which gives
it full acceptability for use in ALL areas where incidental food or potable water contact may occur.
USAGE
Invisilube with its waterproof and chemical resistant
capabilities is an excellent lubricant on all sliding surfaces and slow to high speed bearings, operating in adverse conditions.
Because of its pure synthetic base, high load carrying capacity and wear protection characteristics, Invisilube
is far superior than petroleum, white oil based greases on the
market today. This makes Invisilube a truly multi-service grease
in both food grade and non food grade applications operating in temperatures from -10E F to 400EF. Due to its NSF/U.S.D.A. H-1 *Registration, Invisilube is an excellent choice for both Food Processing plants, where equipment wash down is
an everyday requirement and Water Industries, where contamination of conventional petroleum lubricants is a primary environmental
concern. Invisilube is compatible with most rubbers and plastics
and is a superior lubricant for "O" rings. Some of its diversified uses include:
M
PUMP BEARINGS M STERILIZER CHAINS
M BUSHINGS M SLIDES AND WAYS
M CAN SEAMERS M POOL EQUIPMENT
M
VALVES M ELECTRIC MOTORS
M GASKETS AND
"O" RINGS M WATER FILTERS
M CONVEYORS
M UNIVERSAL JOINTS
ADVANTAGES
M NSF/U.S.D.A. H-1 *Registration M CHEMICAL
RESISTANT
M WATERPROOF M NON STAINING
M NON-MELTING M WIDE TEMPERATURE RANGE
M
CONTAINS PTFE M REDUCES WEAR
M KOSHER
APPROVED M PREVENTS RUST & CORROSION
NSF H-1 Registration No. 059323
TYPICAL SPECIFICATIONS
DESCRIPTION WINNER /
Invisilube
Color:
CLEAR
Base Oil: Synthetic
Thickener: Synthetic
Texture: Smooth & Tenacious
Base Solid: PTFE
NSF/U.S.D.A. Rating: H-1
TEST METHOD ASTM TEST RESULTS
N.L.G.I. Grade ----- 2
Worked
Penetration D-217
60 Strokes 280
10,000 Strokes 290
Base Oil Viscosity,
D-445
cSt @ 40EC 290
cSt @ 100EC 42
Pour Point, EF D-97 -10
Flash Point, EF D-92 400
Dropping Point, EF D-566 NONE
Conradson Carbon, % D-189 .001
Evaporation
Loss, % D-972 1.5
(10 hours @ 210EF)
Corrosion
Preventative Test D-1743 PASS
Water Washout, % Loss D-1264 1.9
Timken OK Load, lbs. D-2509 35
4-Ball Wear Scar, mm D-2266 0.50
(40 Kg, 1 hr. @ 1200 rpm,
167EF)
Dielectric Strength, KV D-877 30
WGK (German Water Classification) ------ 0
PACKAGE AVAILABILITY
Convenient disposable gun loader 14 oz. Cartridges
5-gal. Pail, 15-gal. Keg and 55-gal. Drum
