Back 

KOOL TOOL CUTTING TOOL LUBRICANT

=============================================================================

MATERIAL SAFETY DATA SHEET (SUBSTITUTES FOR OSHA FORM 174): May be used to

comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200.

=============================================================================

PRODUCT NUMBER: 546ae

IDENTITY:  KOOL TOOL Revision Date: 01/21/2007

-----------------------------------------------------------------------------

Section I

-----------------------------------------------------------------------------

Manufacturers name:
Winner Ind chemical
3262 North (E) Street
San bernardino,Ca. 92405

HMIS CODES: REACTIVITY: 1 FLAMMABILITY: 1 HEALTH: 1 PERSONAL PROTECT: A

Section II: HAZARDOUS INGREDIENTS/IDENTITY INFORMATION (All of the

ingredients contained in this product are listed on the TSCA inventory.)

==============================================================================

Name Cas No. OSHA PEL ACGIH TLV OTHER LIM %

CARBON DIOXIDE 124-38-9 5000 PPM 5000 PPM N/A ___

MINERAL SEAL OIL 64741-44-2 5 MG/M3 5 MG/M3 N/A ___

PETROLEUM DISTILLATES 64742-54-7 5 MG/M3 10 MG/M3 N/A ___

___________________________ __________ __________ __________ __________ ___

___________________________ __________ __________ __________ __________ ___

___________________________ __________ __________ __________ __________ ___

___________________________ __________ __________ __________ __________ ___

___________________________ __________ __________ __________ __________ ___

___________________________ __________ __________ __________ __________ ___

Section III: PHYSICAL/CHEMICAL CHARACTERISTICS

==============================================================================

Boiling Point: >500F Specific Gravity (water=1) 0.81

Vapor Pressure(mm Hg) N/A Melting Point: N/A

Vapor Density(AIR=1) >1 Evaporation Rate: <1

Solubility in Water: 0% (Butyl Acetate=1)

Appearance and Odor: CLEAR SPRAY, MILD OIL ODOR

Section IV: FIRE AND EXPLOSION HAZARD DATA

==============================================================================

Flash Point(Method Used):>265F TCC Flammable Limits: LEL:NE UEL: NE

Extinguishing Media: STANDARD DRY CHEMICAL FIRE EXTINGUISHER

Special Fire Fighting Procedures: SELF CONTAINED BREATHING APPARATUS

Unusual Fire and Explosion Hazards: CONTENTS UNDER PRESSURE. EXPOSURE TO

TEMPERATURES ABOVE 120 F MAY CAUSE BURSTING. MAY DEVELOP A FLAMMABLE

ATMOSPHERE IN CONFINED AREAS.

Section V: REACTIVITY DATA PRODUCT NUMBER: 584

==============================================================================

Stability: Unstable: Conditions to avoid:

Stable: X TEMPERATURES ABOVE 120 F, HOT SURFACES

Incompatability (Materials to Avoid): SOME PLASTICS

Hazardous Decomposition or Byproducts: EXPOSURE TO RED HOT SURFACES MAY

PRODUCE CARBON MONOXIDE.

Hazardous Polymerization: May Occur: Will Not Occur: X

Conditions to Avoid: NONE KNOWN

Section VI: HEALTH HAZARD DATA

==============================================================================

Routes of Entry: Inhalation: YES Skin: YES Ingestion:YES

Health Hazards(Acute and Chronic):

INHALATION: DIZZINESS. PROLONGED OVER-EXPOSURE MAY LEAD TO UNCONSCIOUSNESS

AND DEATH. EYES:MAY CAUSE IRRITATION. SKIN: MAY CAUSE LOCALIZED DEFATTING.

INGESTION: NAUSEA, VOMITING, DIARRHEA.

Carcinogenicity: NTP:NO IARC Monographs:NO OSHA Reg:NO

Signs and Symptoms of Exposure: SEE HEALTH HAZARDS

Medical Conditions Generally Aggravated by Exposure: EXCESSIVE EXPOSURE

WILL AGGRAVATE RESPIRATORY, CARDIOVASCULAR OR PULMONARY ILLNESSES.

Emergency and First Aid Procedures: INHALATION: REMOVE TO FRESH AIR. EYES:

FLUSH WITH RUNNING WATER FOR 15 MINUTES. SKIN: WASH WITH SOAP AND WATER.

INGESTION: IF IMMEDIATE ATTENTION IS GIVEN, INDUCE VOMITING. IN ALL CASES,

IF SYMPTOMS PERSIST, CONSULT PHYSICIAN.

Section VII: PRECAUTIONS FOR SAFE HANDLING AND USE

==============================================================================

Steps to be Taken in Case Material is Released or Spilled: WIPE UP WITH

RAG OR USE SOME ABSORBENT CLAY MATERIAL.

Waste Disposal Method: DISPOSE OF RESIDUE IN ACCORDANCE WITH FEDERAL, STATE

AND LOCAL GUIDELINES. DO NOT PUNCTURE OR INCINERATE CONTAINER.

Precautions to be Taken in Handling and Storing: DO NOT USE OR STORE NEAR

HEAT OR OPEN FLAME. EXPOSURE TO TEMPERATURES ABOVE 120 F MAY CAUSE BURSTING.

Other Precautions: VAPOR MAY COLLECT IN LOW LYING AREAS.

Section VIII: CONTROL MEASURES

==============================================================================

Respiratory Protection: USE ONLY IN A WELL VENTILATED AREA

Ventilation: Local Exhaust:ADEQUATE

Mechanical: N/A Special: N/A

Other: N/A

Protective Gloves:N/A

Eye Protection: SAFETY GLASSES ARE RECOMMENDED WHENEVER CHEMICALS ARE USED.

Other Protective Clothing or Equipment:

N/A

Work/Hygienic Practices:

WASH HANDS AFTER USE


Item #546AE


Sale price $150.00

WE GLADLY ACCEPT ALL OF YOUR MAJOR CREDIT CARDS ;INCLUDING VISA,MASTERCARD,DISCOVER ,PAYPAL AND AMERICAN EXPRESS.


AND FOR YOUR CONVENIENCE WE WILL PROCESS EMAIL ,FAX AND TELEPHONE ORDERS AS WELL.

EMAIL US AT:N2WINNERCHEMICAL@AOL.COM
FAX: 909-886-9010 
PHONE TOLL FREE: 1-877-597-6261

  Back