SAFETY DATA SHEET
This SDS
complies with OSHA'S Hazard Communication Standard 29 CFR 1910.1200 and OSHA Form 174
Revised : 2-04-15
IDENTITY AND MANUFACTURER'S INFORMATION
NFPA Rating:
Health-1; Flammab
ility-1; Reactivity-0;
Special- -
HMIS Rating:
Health-1; Flammability-1; R
eactivity-0;
Personal Protection-B
Manufacturer’s Name:
Wineer industrial Supply, inc.
154-a
west foothill blvd
Upland,ca. 91786
DOT Hazard Classification:
Non-Hazardous
Identity
(trade name as used on label)
:
WINNER SUPER IMPACT GREASE
Date
Prepared: 11/09/09 Prepared By: ES/DL/IB
MSDS Number:
G00729 Revision - 3
Information
Calls: (770)422-2071
Emergency Response Number: 1-800-255-3924
NOTICE: JUDGEMENT
BASED ON INDIRECT TEST DATA
SECTION 1 - MATERIAL IDENTIFICATION AND INFORMATION
COMPONENTS-CHEMICAL
NAMES AND COMMON NAMES
(Hazardous Components 1% or greater
; Carcinogens 0.1%
or greater)
CAS Number
SARA
III LIST
OSHA PEL
(ppm)
ACGIH
TLV (ppm)
Carcinogen
Ref. Source
**
PETROLEUM OIL MIXTURE
64742-52-5 No
5mg/M3
5mg/M3
d
TWA
for oil
mist
TWA for oil
mist
SECTION
2 - PHYSICAL/CHEMICAL CHARACTERISTICS
Boiling Point:
N/A
Specific
Gravity
(H2O=1): 0.8
Vapor Pressure:
PSIG @ 70°F (Aerosols):
N/A
Vapor
Pressure
(Non-Aerosols)(mm Hg and Temperature): <0.01
Vapor Density
(Air
= 1): 12
Evaporation Rate
( = 1): N/A
Solubility in Water:
Negligible
Water
Reactive:
No
Appearance and Odor:
Dark green gel with
oil odor.
SECTION 3 - FIRE AND EXPLOSION HAZARD DATA
FLAMMABILITY as per
USA FLAME
PROJECTION TEST (aerosols) N/A
Auto Ignition Temperature
N/A
Flammability
Limits in Air by % in Volume:
% LEL: N/D % UEL: N/D
FLASH POINT AND METHOD
USED
(non-aerosols):
>400ºF COC
SPECIAL FIRE FIGHTING
PROCEDURES:
Self-contained breathing
apparatus.
EXTINGUISHER
MEDIA:
Dry chemical (preferred), carbon dioxide,
foam, water.
Unusual
Fire & Explosion Hazards:
Empty containers may retain product residue including flammable
or explosive vapors. Do not cut, drill,
grind or weld on or near full, part full or empty drum.
SECTION
4 - REACTIVITY HAZARD DATA
STABILITY
[ X ] STABLE [ ] UNSTABLE
HAZARDOUS
POLYMERIZATION
[ ] WILL [ X ] WILL NOT OCCUR
Incompatibility
(Mat.
to avoid): Chlorine or oxygen.
Conditions to Avoid:
Oxidizing atmospheres.
Hazardous
Decomposition Products:
Thermal: unidentified organics.
Oxidation: oxides of carbon.
SECTION
5 - HEALTH HAZARD DATA
PRIMARY ROUTES OF ENTRY:
[ ] INHALATION [ ] INGESTION [
X ] SKIN ABSORPTION [ ] EYE [ ] NOT HAZARDOUS
ACUTE EFFECTS:
Inhalation:
Not
expected to be a problem. Massive exposure to vapor
s or fumes may cause headaches, dizziness, and/or drowziness.
Eye
Contact:
May cause irritation.
Skin Contact:
May cause
irritation.
Ingestion:
May cause vomiting, nausea, diarrhea.
CHRONIC
EFFECTS:
None noted.
Medical Conditions Generally Aggravated by Exposure:
Dermatitis.
EMERGENCY
FIRST AID PROCEDURES
Eye Contact:
Wash with large amounts of water. If irritation
persists, call a physician.
Skin Contact:
Remove contaminated clothing. Wash with
soap and water.
Inhalation:
Remove to fresh air.
Ingestion: DO NOT
INDUCE VOMITING.
Give 3-4 glasses of water. Seek medical attention.
SECTION
6 - CONTROL AND PROTECTIVE MEASURES
Respiratory Protection (specify type):
None required.
Protective
Gloves:
Oil resistant types.
Eye Protection:
Splash goggles
or safety glasses.
Ventilation Requirements:
None required in excess to normal
ventilation.
Other Protective Clothing & Equipment:
Oil resistant
apron.
Hygienic Work Practices:
Do not work in oil soaked clothing. Wash
after handling.
SECTION 7 - PRECAUTIONS FOR SAFE HANDLING AND USE
Steps To
Be Taken If Material Is Spilled Or Released:
Stop flow, dike spill, eliminate all ignition sources, absorb on
inert material and scrape up.
Waste Disposal Methods:
Dispose of in accordance
with local, state and federal regulations.
Precautions To Be Taken In
Handling
& Storage:
Avoid prolonged exposure to mist and vapors. Avoid
flames, sparks
and hot surfaces. Keep containers
closed.
Other Precautions &/or Special Hazards:
KEEP OUT OF REACH OF CHILDREN.
Empty
containers may
contain explosive gas.
We believe the statements, technical
info
rmation and recommendations cont
ained herein are reliable, but
they
are given without warranty or guarantee of any kind.