Shield Anti Graffit coating
MATERIAL SAFETY DATA SHEET
WINNER INDUSTRIAL CHEMICAL AND TOOL SUPPLY,INC.
3246 NORTH E STREET
SAN BERNARDINO,CA
92405
PRODUCT ID NO.: SHIELD ANIT GRAFITI COATING
PAGE: 1
*******************************************************************************
EFFECTIVE DATE: 09/17/08
PRODUCT ID NO.: 33732
DATE PREPARED: 09/06/10
===============================================================================
This Material
Safety Data Sheet contains environmental, health and toxicology
information for your employees. Please make
sure this information is given
to them. It also contains information to help you meet community
Right To
Know emergency response reporting requirements under SARA TITLE III and many
other laws. If you resell this product, this MSDS must be given to the buyer
or the information incorporated
in your MSDS.
________________________________________________________________________
This MSDS complies with 29 CFR 1910.1200
(The Hazard Communication Standard)
================== SECTION I - PRODUCT IDENTIFICATION ===============
PRODUCT DESCRIPTION: WINNER CHEMICAL
SHIELD
ANTI GRAFFITI COATING 12 OZ
D.O.T. PROPER SHIPPING NAME: ORM-D
CONSUMER COMMODITY
NFPA CODES: HEALTH - 1 FLAMMABILITY
- 1 CORROSIVE - 0 REACTIVITY - 0
======================= SECTION II - COMPONENTS =====================
ALIPHATIC HYDROCARBON
* PEL: 500 PPM....
CAS #: 110-54-3
TLV: 50 PPM
A-,W-DIHYDRO POLY-DIMETHYL SILOXANE PEL: NOT DETERMINED
CAS #: 63148-62-9
TLV: NOT DETERMINED
PROPRIETARY MIXTURE/ TRADE
SECRET
HYDROCARBON PROPELLANT
PEL: 800 PPM
CAS
#: 68476-86-8
TLV: 800 PPM Note:
no ingredients in this product are considered hazardous or carcinogenic as defined by Cal Osha
=====================
SECTION III - PHYSICAL DATA ===================
BOILING POINT FOR PRODUCT: NOT DETERMINED
VAPOR PRESSURE FOR PRODUCT: > 80 psi @ 65 deg F.
VAPOR DENSITY FOR PRODUCT: NOT DETERMINED
SPECIFIC GRAVITY: LIQUID:0.769
V.O.C.(GRAMS PER LITER): NOT DETERMINED
WATER SOLUBILITY: NIL
APPEARANCE: CLEAR COATING
MEETS C.A.R.B. MIR: < 1.5 MIR CLEAR COAT
PAGE: 2
*******************************************************************************
===============
SECTION III - PHYSICAL DATA (CONTINUED) =============
VOC PERCENTAGE:AERO: 80 %
================= SECTION IV - FIRE AND EXPLOSION DATA ==============
FLASH POINT(N/D): LEVEL 2 AEROSOL
EXPLOSIVE LIMIT (PRODUCT): LOWER - N/D UPPER - N/D
SEC04.45
FIRE AND EXPLOSION HAZARDS:.This product like any other aerosol paint is slightly flammable.
EXTINGUISHING MEDIA: Dry Chemical. CO2. Halogenated Extinguishing Agent.
Stop Gas Flow.
SPECIAL FIREFIGHTING PROCEDURES: Gas fires should not be extinguished unless
the gas flow can be stopped immediately. Allow the fire to burn
itself out. If the source cannot be shut off immediately, all
equipment and surfaces exposed to the fire should be cooled with
water to prevent over-heating, flash-backs, or explosions. Control
fire until gas supply can be shut off. Use proper protective
equipment. Use fresh air respirator when exposure to hazardous
concentrations of toxic gases is possible.
.
==================== SECTION V - HEALTH HAZARD DATA =================
05.20
GENERAL:This material is an aspiration hazard and defats the skin.
EYE CONTACT: Slightly irritating but does not injure eye tissue.
SKIN CONTACT: Low order of toxicity. Frequent or prolonged contact may
irritate and cause dermatitis. Skin contact may aggravate an
existing dermatitis condition.
INHALATION: High vapor/aerosol concentrations (greater than approximately 100
ppm) are irritating to the eyes and the respiratory tract, may cause
headaches, dizziness, anesthesia, drowsiness, unconsciousness, and
other central nervous system effects, including death.
INGESTION: Small amounts of this product aspirated into the respiratory
system during ingestion or vomiting may cause mild to severe
pulmonary injury, possibly minimal toxicity.
FIRST AID
EYE CONTACT: Flush eyes with large amounts of water until irritation
PAGE: 3
*******************************************************************************
============== SECTION V - HEALTH HAZARD DATA(CONTINUED) ============
subsides. If irritation persists, get medical attention.
SKIN CONTACT: Flush with large amounts of water; use soap it
available. Remove grossly contaminated clothing, including shoes, and
launder before reuse.
INHALATION: Using proper respiratory protection, immediately remove the
affected victim from exposure. Administer artificial respiration if
breathing is stopped. Keep at rest. Call for prompt medical attention
INGESTION: If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt
medical attention.
PRECAUTIONS
.
PERSONAL PROTECTION: For open systems where contact is likely, wear safety
glasses with side shields, long sleeves, and chemical resistant
gloves. Where concentrations in air may exceed the limits, work
practice or other means of exposure reduction are not adequate,
NIOSH/MSHA approved respirators may be necessary to prevent
overexposure by inhalation.
VENTILATION: The use of mechanical dilution ventilation is recommended
whenever this product is used in a confined space, is heated above
ambient temperatures, or is agitated.
.
===================== SECTION VI - REACTIVITY DATA ==================
06.20
STABILITY: Stable
CONDITIONS TO AVOID: Temperatures above 130 degree F.
HAZARDOUS POLYMERIZATION: Will not occur
MATERIALS AND CONDITIONS TO AVOID INCOMPATIBILITY: Strong oxidizing agents
HAZARDOUS DECOMPOSITION PRODUCTS: None
================ SECTION VII - SPILL OR LEAK PROCEDURES =============
SEC07.45
STEPS TO BE TAKEN IN CASE CONTAINER IS PUCTURED AND MATERIAL IS RELEASED:
Clean up area by mopping or with absorbant materials and place
in closed container for disposal. Consult Federal, State, and local
disposal authorities.
WASTE DISPOSAL METHOD: Consult local authorities for proper waste disposal
procedures. Empty de-pressurized containers can not be reused. Cans
which are pressurized or contain liquid must be disposed of in a per-
Item #755AEB
|
