04/23/2015Revision: 07/07/2015Printed: Page: 1

Brilliance Stainless Steel Polish SAFETY DATA SHEET

QT2220Product Code: Brilliance Stainless Steel PolishProduct

Name: Winner Industrial SupplyCompany

Address: 154 "A" Foothill Blvd #149 Upland, CA  91786

 infotrac #107557Emergency Contact: (800)535-5053

 vincent@winnerchemicals.comInformation: (909)886-9466

PolishRecommended Use: For sale to, use and storage by service persons only.Intended Use:

1.  Product and Company Identification

2.  Hazards Identification

Wear protective gloves, protective clothing, eye protection, face protection. Use only outdoors or in a well-ventilated area. Wash hands thoroughly after handling. Keep out of reach of children.

GHS Precaution Phrases:

If swallowed: Immediately call a Poison Center or doctor. If inhaled: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If on skin (or in hair): Wash with plenty of soap and water. If skin irritation or rash occurs, seek medical attention. Do NOT induce vomiting.

GHS Response Phrases:

Dispose of contents and container according to the local, city, state and federal regulations. Store in cool/well-ventilated place. Store locked up.

GHS Storage and Disposal Phrases:

May be fatal if swallowed and enters airways. Combustible liquid. May be harmful if inhaled. May be harmful in contact with skin. Causes eye irritation.

GHS Hazard Phrases:

Aspiration Toxicity, Category 1 Flammable Liquids, Category 4 Acute Toxicity: Inhalation, Category 4 Acute Toxicity: Skin, Category 5 Serious Eye Damage/Eye Irritation, Category 2B

DangerGHS Signal Word:

GHS format

04/23/2015Revision: 07/07/2015Printed: Page: 2

Brilliance Stainless Steel Polish SAFETY DATA SHEET

Chronic: Prolonged or repeated skin contact may cause defatting and dermatitis.Potential Health Effects (Acute and Chronic):

May cause eye irritation. Avoid any eye contact.Eye Contact: May cause irritation with burning pain, itching and redness. Avoid any skin contact.Skin Contact: Aspiration hazard. May cause irritation of the digestive tract. Do not induce vomiting unless directed by a physician. Toxic by ingestion. May cause dizziness, headaches and drowsiness. Ingestion: May cause respiratory tract irritation. May cause dizziness, headaches and drowsiness.Inhalation:

CAS # Hazardous Components (Chemical Name) 3.  Composition/Information on Ingredients Concentration  64742-47-8 Hydrotreated light distillate (petroleum) Proprietary   8042-47-5 Technical white oil* (regulated as mist only) Proprietary

In Case of Inhalation:

4.  First Aid Measures

Emergency and First Aid Procedures:

Treat symptomatically and supportively.Note to Physician:

In case of contact, immediately flush eyes with plenty of water for a t least 15 minutes. Get medical aid.

In Case of Eye Contact:

In case of contact, flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical aid if irritation develops and persists. Wash clothing before reuse.

In Case of Skin Contact:

Potential for aspiration if swallowed. Get medical aid immediately. Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. If vomiting occurs naturally, have victim lean forward.

In Case of Ingestion:

If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.

5.  Fire Fighting Measures Flash Pt: > 320.00 F

Combustible liquid. As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool.

Fire Fighting Instructions:

No data available.Flammable Properties and Hazards:

Autoignition Pt: NE Explosive Limits: LEL:    N/A         N.E.          UEL:    N/A         N.E. Use water spray, dry chemical, carbon dioxide, or appropriate foam.Suitable Extinguishing Media:

GHS format

04/23/2015Revision: 07/07/2015Printed: Page: 3

Brilliance Stainless Steel Polish SAFETY DATA SHEET

6.  Accidental Release Measures Use proper personal protective equipment as indicated in Section 8. Spills/Leaks: Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Provide ventilation.

Steps To Be Taken In Case Material Is Released Or Spilled:

7.  Handling and Storage Wash thoroughly after handling. Use with adequate ventilation. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Avoid ingestion and inhalation. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames. Keep away from heat and flame.

Precautions To Be Taken in Handling:

Keep away from sources of ignition. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

Precautions To Be Taken in Storing: 8.  Exposure Controls/Personal Protection

OSHA TWA ACGIH TWACAS # Partial Chemical Name Other Limits

No data. TLV:  200 mg/m3  64742-47-8 Hydrotreated light distillate (petroleum) No data. No data. No data.   8042-47-5 Technical white oil* (regulated as mist only) No data. Always use a NIOSH approved respirator when necessary.Respiratory Equipment (Specify Type): Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Eye Protection: Wear appropriate protective gloves to prevent skin exposure.Protective Gloves: Wear appropriate protective clothing to prevent skin exposure.Other Protective Clothing: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low. Engineering Controls (Ventilation etc.): 9.  Physical and Chemical Properties Physical States: [   ] Gas       [ X ] Liquid       [   ] Solid

Melting Point: NE Boiling Point: > 450.00 F Decomposition Temperature: NE Autoignition Pt: NE Flash Pt: > 320.00 F Explosive Limits: LEL:    N/A         N.E.          UEL:    N/A         N.E. Specific Gravity (Water = 1):  0.840 Density: ~ 7.00 LB/GA Colorless liquid with fruity fragrance.Appearance and Odor:

GHS format

04/23/2015Revision: 07/07/2015Printed: Page: 4

Brilliance Stainless Steel Polish SAFETY DATA SHEET

Bulk density: NP Vapor Pressure (vs. Air or mm Hg): NE Vapor Density (vs. Air = 1): NE Evaporation Rate: NE Solubility in Water:  Insoluble

Percent Volatile: No data. VOC / Volume: 16.8000 G/L

Saturated Vapor Concentration:

NE

Viscosity: NP pH: NA

Heat Value: NP Particle Size: NP Corrosion Rate: NP

10. Stability and Reactivity

Excessive heat, open flames and sparks. ignition sources.Conditions To Avoid Instability: Unstable [    ]       Stable [ X ]Stability: Water, strong oxidizers, heat, open flames and sparks.Incompatibility - Materials To Avoid: Nitrogen oxides, Carbon monoxide, oxides of sulfur.Hazardous Decomposition Or Byproducts: Will occur [    ]       Will not occur [ X ]Possibility of Hazardous Reactions: None.Conditions To Avoid Hazardous Reactions:

CAS # Hazardous Components (Chemical Name) NTP

11. Toxicological Information No data available.Toxicological Information: CAS# 64742-47-8: Not listed by ACGIH, IARC, NTP, or CA Prop 65.Carcinogenicity/Other Information:

IARC ACGIH OSHA

  64742-47-8 Hydrotreated light distillate (petroleum) n.a. n.a. A4 n.a.

   8042-47-5 Technical white oil* (regulated as mist only) n.a. n.a. n.a. n.a.

No data available. 12. Ecological Information

GHS format

04/23/2015Revision: 07/07/2015Printed: Page: 5

Brilliance Stainless Steel Polish SAFETY DATA SHEET

Dispose of contents and container according to the local, city, state and federal regulations.

Waste Disposal Method:

13. Disposal Considerations

14. Transport Information

Not regulated as a hazardous material.DOT Proper Shipping Name: DOT Hazard Class: UN/NA Number: LAND TRANSPORT (US DOT):

Not Regulated.TDG Shipping Name: LAND TRANSPORT (Canadian TDG):

Not Regulated.IMDG/IMO Shipping Name: MARINE TRANSPORT (IMDG/IMO):

Not Regulated.ICAO/IATA Shipping Name: AIR TRANSPORT (ICAO/IATA): 15. Regulatory Information

CAS # Hazardous Components (Chemical Name) Other US EPA or State Lists  64742-47-8 Hydrotreated light distillate (petroleum) CAA HAP,ODC: No;  CWA NPDES: No;  TSCA: Yes Inventory;  CA PROP.65: No;  CA TAC, Title 8: No   8042-47-5 Technical white oil* (regulated as mist only) CAA HAP,ODC: No;  CWA NPDES: No;  TSCA: Yes Inventory;  CA PROP.65: No;  CA TAC, Title 8: No

16. Other Information

No data available.Additional Information About This Product:

Hazard Rating System:

Instability

Special Hazard

Health

Flammability

HEALTH FLAMMABILITY

PPE PHYSICAL

The manufacturer believes the data set forth are accurate and makes no warranty with respects thereto and disclaims all liability for reliance thereon. Such data are offered solely for consideration, investigation and verification. Also, the data set forth is for the concentrated finished product. All lab samples are for experimental purposes only and used at the customers discretion.

Company Policy or Disclaimer:

1

0 1

B

1

1

0

04/23/2015Revision Date: NFPA:HMIS:

GHS format