Page 1/4

Material Safety Data Sheet                   STEP SAFE

acc. to ISO/DIS 11014

Printing date 01/09/2012 Revised On 01/09/2012

34.0.2

1 Identification of the substance and manufacturer

Trade name: STEP SAFE CLEAR/GRAY/YELLOW/BLACK

Product code: 0000160087

Manufactured Exclusively For:

Winner Industrial  Supply

3246 North E street

San Bernardino, Ca. 92405

Emergency telephone

number: CHEMTEL 1-800-255-3924, 813-248-0585 *if located outside the U.S.*

2 Composition/information on ingredients

Chemical Description: This product is a mixture of the substances listed below with nonhazardous additions.

Dangerous components:

67-64-1 Acetone 37.44%

74-98-6 propane 13.87%

1330-20-7 xylene (mix) 9.17%

106-97-8 n-butane 8.15%

108-10-1 methyl isobutyl ketone 6.07%

13463-67-7 titanium dioxide 4.75%

100-41-4 ethyl benzene 2.29%

64742-47-8 Mineral Spirits 1.56%

108-65-6 PM acetate 1.08%

3 Hazards identification

Hazard Information for

people and the

environment: Extremely flammable liquid and vapor in a pressurized container. Keep away from heat, sparks, and

flame.

Has narcotizing effect.

Risk phrases: Extremely flammable.

Harmful by inhalation.

Irritating to eyes.

Safety phrases: Keep out of the reach of children.

Keep away from sources of ignition - No smoking.

Do not breathe gas/fumes/vapour/spray.

Do not empty into drains, dispose of this material and its container at hazardous or special waste

collection point

If swallowed, seek medical advice immediately and show this container or label.

Use only in well-ventilated areas.

Effects of chronic

overexposure: May cause permanent brain and nervous system damage. Repeated overexposure can also damage

kidneys, lungs, liver, heart, and blood. Intentional misuse by deliberately inhaling the contents may be

harmful or fatal.

NFPA ratings (0 - 4): Health = 1

Fire = 4

Reactivity = 3

HMIS-ratings (0 - 4): Health= 1

Fire= 4

Physical Hazard= 3

4 First aid measures

General information: Symptoms of poisoning may occur even after several hours. Medical observation for at least 48 hours

after the accident is recommended.

After inhalation: Supply fresh air. If necessary, provide artificial respiration. Keep patient warm. Consult doctor if

symptoms persist.

After skin contact: Remove contaminated clothing. Wash exposed area with soap and water.

After eye contact: Move to fresh air. Rinse opened eye for several minutes under running water. If symptoms persist,

consult a doctor.

After swallowing: Contact physician or poison control center.

5 Firefighting measures

Extinguishing agents: CO2, sand, extinguishing powder, or water spray. Fight larger fires with water spray or alcohol resistant

foam.

Special hazards: No further relevant information available.

Protective equipment: A respiratory protective device may be necessary.

USA

(Contd. on page 2)

Page 2/4

Material Safety Data Sheet

acc. to ISO/DIS 11014

Printing date 01/09/2012 Revised On 01/09/2012

Trade name: GOOD GRIP GRAY

(Contd. of page 1)

34.0.2

6 Accidental release measures

Personal precautions,

protective equipment and

emergency procedures Wear protective equipment. Keep unprotected persons away.

Environmental

precautions: Do not allow product to reach sewage systems or ground water.

Methods and material for

containment and cleaning

up: Ensure adequate ventilation.

7 Handling and storage

Fire/explosion protection: Do not spray on a naked flame or any incandescent material. Do not smoke. Protect from electrostatic

discharges.

Storage requirements: Observe pressurized container storage regulations. Consult with your local authorities.

8 Exposure controls/personal protection

Components with limit values that require monitoring at the workplace:

67-64-1 Acetone

PEL

REL

TLV

2400 mg/m³, 1000 ppm

590 mg/m³, 250 ppm

Short-term value: (1782) NIC-1187 mg/m³, (750) NIC-500 ppm

Long-term value: (1188) NIC-475 mg/m³, (500) NIC-200 ppm

BEI

74-98-6 propane

PEL

REL

TLV

1800 mg/m³, 1000 ppm

1800 mg/m³, 1000 ppm

Varies mg/m³, 1000 ppm

1330-20-7 xylene (mix)

PEL

REL

TLV

435 mg/m³, 100 ppm

Short-term value: 655 mg/m³, 150 ppm

Long-term value: 435 mg/m³, 100 ppm

Short-term value: 651 mg/m³, 150 ppm

Long-term value: 434 mg/m³, 100 ppm

BEI

106-97-8 n-butane

REL

TLV

1900 mg/m³, 800 ppm

Varies mg/m³, 1000 ppm

108-10-1 methyl isobutyl ketone

PEL

REL

TLV

410 mg/m³, 100 ppm

Short-term value: 300 mg/m³, 75 ppm

Long-term value: 205 mg/m³, 50 ppm

Short-term value: 307 mg/m³, 75 ppm

Long-term value: 82 mg/m³, 20 ppm

BEI

100-41-4 ethyl benzene

PEL

REL

TLV

435 mg/m³, 100 ppm

Short-term value: 545 mg/m³, 125 ppm

Long-term value: 435 mg/m³, 100 ppm

Short-term value: 543 mg/m³, 125 ppm

Long-term value: 87 mg/m³, 20 ppm

BEI

108-65-6 PM acetate

WEEL 50 ppm

Hygienic protection: Keep away from foodstuffs and animal feed. Wash hands after use.

Breathing equipment: A respirator is generally not necessary when using this product outdoors or in large open areas. In cases

where short and/or long term overexposure exists, a charcoal filter respirator should be worn. If you

suspect overexposure conditions exist, please consult an authority on chemical hygeine.

Hand protection: Protective gloves. The glove material has to be impermeable and resistant to the substance. No glove

recommendation can be given.

Eye protection: Tightly sealed goggles

9 Physical and chemical properties

Odor: Aromatic

pH-value: Not determined.

Boiling point: -44°C (-47 °F)

Flash point: -19°C (-2 °F)

(Contd. on page 3)

USA

Page 3/4

Material Safety Data Sheet

acc. to ISO/DIS 11014

Printing date 01/09/2012 Revised On 01/09/2012

Trade name: STEP SAFE GRAY/YELLOW/CLEAR/BLACK

(Contd. of page 2)

34.0.2

Flammability (solid, gaseous): Not applicable.

Auto igniting: Product is not self-igniting.

Danger of explosion: Stable at normal temperatures. Can may burst when exposed to temperatures exceeding 120

degrees fahrenheit.

In use, may form flammable/explosive vapour-air mixture.

Lower Explosion Limit: 1.7 Vol %

Upper Explosion Limit: 10.9 Vol %

Vapor Pressure: 40 PSI, 2750 hPa

Specific Gravity: Between 0.77 and 0.85 (Water equals 1.00)

VOC content: 523.2 g/l / 4.37 lb/gl

VOC content (less exempt solvents): 42.5 %

MIR Value: 1.43

Solids content: 20.0 %

Other information No further relevant information available.

10 Stability and reactivity

Conditions to avoid: Do not allow the can to exceed 120 degrees Fahrenheit. Stable at normal temperatures.

Hazardous

decomposition: No dangerous decomposition products known.

11 Toxicological information

Skin effects: No irritant effect.

Eye effects: Irritating effect.

Sensitization: No sensitizing effects known.

12 Ecological information

Aquatic toxicity: Hazardous for water, do not empty into drains.

Other information: This product does not contain any chlorofluorocarbons (CFC's), hydrochlorofluorocarbons (HCFC's),

perfluorocarbons (PFC's), or chlorinated solvents.

13 Disposal considerations

DISPOSAL METHOD: Dispose of in accordance with local, state, and federal regulations. Do not puncture, incinerate, or compact.

Partially empty cans must be disposed of responsibly. Do not heat or cut empty containers with electric or gas torches.

Recommendation: Completely empty cans should be recycled.

14 Transport information

UN-Number UN1950

DOT Consumer Commodity ORM-D

AEROSOLS, flammable

Class 2.1

Marine pollutant: No

EMS Number: F-D,S-U

Packaging Group: --

15 Regulatory information

SARA Section 355 (extremely hazardous substances):

None of the ingredients in this product are listed.

SARA Section 313 (Specific toxic chemical listings):

1330-20-7 xylene (mix)

108-10-1 methyl isobutyl ketone

100-41-4 ethyl benzene

TSCA: All ingredients are listed.

CPSC: This product complies with 16 CFR 1303 and does not contain more than 90 ppm of lead.

California Proposition 65 chemicals known to cause cancer:

108-10-1 methyl isobutyl ketone

100-41-4 ethyl benzene

1333-86-4 Carbon black

Canadian WHMIS: D2A

EPA:

67-64-1 Acetone I

1330-20-7 xylene (mix) I

108-10-1 methyl isobutyl ketone I

(Contd. on page 4)

USA

Page 4/4

Material Safety Data Sheet

acc. to ISO/DIS 11014

Printing date 01/09/2012 Revised On 01/09/2012

Trade name: STEP SAFE GRAY/CLEAR/YELLOW/BLACK

(Contd. of page 3)

34.0.2

100-41-4 ethyl benzene D

IARC:

1330-20-7 xylene (mix) 3

108-10-1 methyl isobutyl ketone 2B

13463-67-7 titanium dioxide 2B

100-41-4 ethyl benzene 2B

9002-88-4 Shamrock texture 5384W 55 mic. 3

ACGIH:

67-64-1 Acetone A4

1330-20-7 xylene (mix) A4

13463-67-7 titanium dioxide A4

100-41-4 ethyl benzene A3

NIOSH:

13463-67-7 titanium dioxide

1333-86-4 Carbon black

16 Other information

This product was manufactured in the U.S.A.

The information on this sheet is based on our present knowledge. However, this shall not constitute a guarantee for any specific

product features and shall not establish a legally valid contractual relationship.

Contact: Regulatory Affairs

Abbreviations and

acronyms: IMDG: International Maritime Code for Dangerous Goods

DOT: US Department of Transportation

CAS: Chemical Abstracts Service (division of the American Chemical Society)

NFPA: National Fire Protection Association (USA)

HMIS: Hazardous Materials Identification System (USA)

VOC: Volatile Organic Compounds (USA, EU)

ISO: International Organization for Standardization

EPA: Environmental Protection Agency

IARC: International Agency for the Research of Cancer

NIOSH: National Institute for Occupational Safety and Health

TSCA: Toxic Substances Control Act

CPSC: Consumer Product Safety Commission

USA