=============================================================================MATERIAL ---------------------------------------------------------------------Manufacturer's Name: Winner Industrial Chemical & Tool Supply, Inc. Telephone Numbers:Address: 3262 NORTH E STREET SAN BERNARDINO, CA. 92405PHONE: 877-597-6261------------------------------------------------------------------------------HMIS CODES: REACTIVITY: 1 FLAMMABILITY: 0 HEALTH: 2 PERSONAL PROTECT: ASection II: HAZARDOUS INGREDIENTS/IDENTITY INFORMATION (All of theingredients contained in this product are listed on the TSCA inventory.)==============================================================================Name Cas No. OSHA PEL ACGIH TLV OTHER LIM %CARBON DIOXIDE 124-38-9 5000 PPM 5000 PPM N/A ___MINERAL SEAL OIL 64741-44-2 5 MG/M3 5 MG/M3 N/A ___ *+ 127-18-4 25 PPM 50 PPM N/A ______________________________ __________ __________ __________ __________ ______________________________ __________ __________ __________ __________ ______________________________ __________ __________ __________ __________ ______________________________ __________ __________ __________ __________ ______________________________ __________ __________ __________ __________ ______________________________ __________ __________ __________ __________ ___Comment:THIS PRODUCT CONTAINS NO  TOXIC CHEMICALS MARKED WITH AN * SUBJECTTO THE REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNINGAND COMMUNITY RIGHT-TO-KNOW ACT OF 1986 AND OF 40CFR372.______________________________________________________________________ALTHOUGH CLASSIFIED FOOD GRADE THIS PRODUCT SHOULD NOT COME IN CONTACT WITH FOOD TO BE CONSUMED____________________________________________________________________________________________________________________________________________ Section III: PHYSICAL/CHEMICAL CHARACTERISTICS==============================================================================Boiling Point: 250 Specific Gravity (water=1) 1.44Vapor Pressure(mm Hg) 15 Melting Point: N/AVapor Density(AIR=1) 1 Evaporation Rate: 1Solubility in Water: 0% (Butyl Acetate=1)Appearance and Odor: CLEAR SPRAY, TYPICAL CHLORINATED SOLVENT ODORSection IV: FIRE AND EXPLOSION HAZARD DATA==============================================================================Flash Point(Method Used):NONE Flammable Limits: LEL:N/A UEL: N/AExtinguishing Media: STANDARD DRY CHEMICAL FIRE EXTINGUISHERSpecial Fire Fighting Procedures: NONEUnusual Fire and Explosion Hazards: CONTENTS UNDER PRESSURE. EXPOSURE TOTEMPERATURES ABOVE 120 F MAY CAUSE BURSTING.Section V: REACTIVITY DATA PRODUCT NUMBER: 550==============================================================================Stability: Unstable: Conditions to avoid:Stable: X TEMPERATURES ABOVE 120 FIncompatability (Materials to Avoid): SOME PLASTICSHazardous Decomposition or Byproducts: NONEHazardous Polymerization: May Occur: Will Not Occur: XConditions to Avoid: NONESection VI: HEALTH HAZARD DATA==============================================================================Routes of Entry: Inhalation: YES Skin: YES Ingestion:YESHealth Hazards(Acute and Chronic):INHALATION: DIZZINESS. EXCESSIVE INHALATION MAY LEAD TO UNCONSCIOUSNESS.EYES: STRONG IRRITATION. SKIN: MILD IRRITATION. MAY CAUSE DEFATTING OFTISSUE. INGESTION: NAUSEA, VOMITING, DIZZINESS, UNCONSCIOUSNESS OR DEATH.Carcinogenicity: NTP:YES IARC Monographs:Yes OSHA Reg:YesSigns and Symptoms of Exposure: SEE HEALTH HAZARDSMedical Conditions Generally Aggravated by Exposure: EXCESSIVE EXPOSUREWILL AGGRAVATE RESPIRATORY, CARDIOVASCULAR OR PULMONARY ILLNESSES.Emergency and First Aid Procedures: INHALATION: REMOVE TO FRESH AIR.CONSULT PHYSICIAN. SKIN:WASH EFFECTED AREA. CONSULT PHYSICIAN IF IRRITATIONPERSISTS. EYES: RINSE EYES WITH WATER FOR 15 MINUTES. CONSULT PHYSICIANPHYSICIAN IS IRRITATION PERSISTS. INGESTION: CONSULT PHYSICIAN.Section VII: PRECAUTIONS FOR SAFE HANDLING AND USE==============================================================================Steps to be Taken in Case Material is Released or Spilled: WIPE UP WITHRAG OR USE SOME ABSORBENT CLAY MATERIAL.Waste Disposal Method: DISPOSE OF RESIDUE IN ACCORDANCE WITH FEDERAL,STATE AND LOCAL GUIDELINES. DO NOT PUNCTURE OR INCINERATE CONTAINER. DONOT REUSE CONTAINER. WRAP CONTAINER AND PLACE IN TRASH COLLECTION.Precautions to be Taken in Handling and Storing: DO NOT USE OR STORE NEARHEAT OR OPEN FLAMES. EXPOSURE TO TEMPERATURES ABOVE 120 F MAY CAUSEBURSTING.Other Precautions: NONESection VIII: CONTROL MEASURES==============================================================================Respiratory Protection: USE ONLY IN WELL VENTILATED AREA.Ventilation: Local Exhaust:ADEQUATEMechanical: N/A Special: N/AOther: N/AProtective Gloves:N/AEye Protection: SAFETY GOGGLES ARE RECOMMENDED WHENEVER CHEMICALS ARE USED.Other Protective Clothing or Equipment:N/AWork/Hygienic Practices:WASH HANDS AFTER USE._