Enter subhead content here

MSDS      DELETE GRAFFITI REMOVER

COMPLIES WITH OSHA’S HAZARD COMMUNICATION STANDARD (29 CFR 1910.1200)

SECTION I · PRODUCT IDENTIFICATION

Product Name: Delete Graffiti Remover Formula: Proprietary HMIS Rating (Based on Aerosol Conc.):

Proprietary HMIS Rating (Based on Aerosol Conc.):

Product Number: 175 Date Prepared: 11/15/07 0-Minimal 1- Slight 2- Moderate

175 Date Prepared: 11/15/07 0-Minimal 1- Slight 2- Moderate

Product Type: AEROSOL Emergency Phone: (800) 535-5053 3-Serious 4- Extreme

AEROSOL Emergency Phone: (800) 535-5053 3-Serious 4- Extreme

Supplier's Name: Winner Industrial Supply Information Phone: (877) 597-6261 HEALTH1 FIRE: 3 REACTIVITY: 0

(877) 597-6261 HEALTH1 FIRE: 3 REACTIVITY: 0

Supplier's Address: 2375 East Tropicana Ave. #768, Las Vegas, NV 89119 Personal Protection: B

2375 East Tropicana Ave. #768, Las Vegas, NV 89119 Personal Protection: B

D.O.T. Hazard Class: CONSUMER COMMODITY · ORM-D

CONSUMER COMMODITY · ORM-D

SECTION II · INGREDIENTS

CHEMICAL NAME CAS # %WT 313/Chem Skin Carcinogen PEL TWA/TLV

Toluene 108-88-3 50-60 YES NO NO 100 ppm 100 ppm

Diacetone Alcohol 123-42-2 01-10 NO NO NO 50 ppm 50 ppm

Isopropyl Alcohol 67-63-0 01-10 NO NO NO 400 ppm 400 ppm

Liquefied Petroleum Gas 68476-86-8 15-25 NO NO NO 1000 ppm 1000 ppm

SECTION III · PHYSICAL DATA

Data Below Based On Aerosol Concentrate Only:

Boiling Point: ~194°F

pH: N/A Vapor Density(Air=1): >1

Solubility In Water: Emulsifies Specific Gravity (H2O=1)@75°F: 0.913

Appearance/Odor: Creamy White Jel, Mild Odor

Appearance/Odor: Creamy White Jel, Mild Odor

2O=1)@75°F: 0.913

Appearance/Odor: Creamy White Jel, Mild Odor

Data Below Based On Total Contents:

Vapor Pressure of can (psig @70°F): 45

Total VOC%: ~ 84%

SECTION IV · FIRE AND EXPLOSION DATA

Flash Point (of Concentrate Only): 54°F (T.O.C.) Flammability (as per USA Flame Projection Test): Extremely Flammable Spray

(of Concentrate Only): 54°F (T.O.C.) Flammability (as per USA Flame Projection Test): Extremely Flammable Spray

Extinguishing Media: Foam, CO2, Dry Media

Foam, CO2, Dry Media

Special Fire Fighting Procedures: Wear self-contained breathing apparatus and protective clothing. Cool fire exposed containers to prevent rupturing.

Wear self-contained breathing apparatus and protective clothing. Cool fire exposed containers to prevent rupturing.

Unusual Fire and Explosion Hazards: Exposure to temperature above 120° F may cause bursting.

Exposure to temperature above 120° F may cause bursting.

SECTION V · REACTIVITY DATA

Stability: Material Stable. Hazardous Polymerization: Will not Occur.

Material Stable. Hazardous Polymerization: Will not Occur.

Incompatibility: Avoid contact with strong oxidizing agents.

Avoid contact with strong oxidizing agents.

Hazardous Decomposition Products: Carbon Dioxide, Carbon Monoxides.

Carbon Dioxide, Carbon Monoxides.

SECTION VI · STORAGE AND HANDLING

KEEP OUT OF REACH OF CHILDREN.

For Industrial and Institutional use only.

Store in a cool, dry area away from heat or open flame.

Do not store at temperatures above 120° F. NFPA Code 30B Rating: Level 2 Aerosol.

NFPA Code 30B Rating: Level 2 Aerosol.

SECTION VII · HEALTH AND FIRST AID

PRIMARY ROUTES OF ENTRY & EFFECTS OF OVER EXPOSURE:

Eyes: May cause irritation. Symptoms include stinging, tearing, redness, and swelling of eyes.

May cause irritation. Symptoms include stinging, tearing, redness, and swelling of eyes.

Skin: Frequent or prolonged contact may cause irritation. May aggravate existing skin conditions.

Frequent or prolonged contact may cause irritation. May aggravate existing skin conditions. Inhalation: Inhalation of mist can cause irritation of nasal and respiratory passages. Abusive or excessive inhalation may cause irritation to the upper respiratory tract,

dizziness, nausea and other central nervous system effects.

dizziness, nausea and other central nervous system effects.

Inhalation of mist can cause irritation of nasal and respiratory passages. Abusive or excessive inhalation may cause irritation to the upper respiratory tract,

dizziness, nausea and other central nervous system effects.

Ingestion: Can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Aspiration of material into the lungs can cause lung inflammation and other lung injury..

Can cause gastrointestinal irritation, nausea, vomiting and diarrhea. Aspiration of material into the lungs can cause lung inflammation and other lung injury..

FIRST AID PROCEDURES:

Eyes: Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. If irritation persists get medical attention immediately.

Flush with large amounts of cool running water for at least 15 minutes while holding upper and lower lids open. If irritation persists get medical attention immediately.

Skin: Wash with soap and water. If irritation persists seek medical attention.

Wash with soap and water. If irritation persists seek medical attention.

Inhalation: Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration.

Remove to fresh air. Seek medical attention immediately. If breathing stops give artificial respiration.

Ingestion: Do not induce vomiting. Seek medical attention immediately.

Do not induce vomiting. Seek medical attention immediately.

SECTION VIII · SPECIAL PROTECTION DATA

Respiratory Protection: None needed for proper use in accordance with label directions.

None needed for proper use in accordance with label directions.

Ventilation: Provide local exhaust to keep air concentration of ingredients listed in Section II below acceptable limits.

Provide local exhaust to keep air concentration of ingredients listed in Section II below acceptable limits.

Protective Gloves: Use chemical resistant gloves if hand contact will be made.

Use chemical resistant gloves if hand contact will be made.

Eye Protection: Always wear safety glasses or chemical proof goggles when working with chemicals.

Always wear safety glasses or chemical proof goggles when working with chemicals.

SECTION IX · SPILL OR LEAK PROTECTION

STEPS TO BE TAKEN IN CASE OF SPILL OR LEAK: Allow propellant to evaporate. Maintain local exhaust and adequate ventilation. No smoking. Keep sparks, heat

sources and open flame far away from spill or leak. Cover with absorbent material and sweep up. Wash area to prevent slipping. Dispose of soaked absorbent material in

accordance with Federal, State and local laws.

sources and open flame far away from spill or leak. Cover with absorbent material and sweep up. Wash area to prevent slipping. Dispose of soaked absorbent material in

accordance with Federal, State and local laws.

Allow propellant to evaporate. Maintain local exhaust and adequate ventilation. No smoking. Keep sparks, heat

sources and open flame far away from spill or leak. Cover with absorbent material and sweep up. Wash area to prevent slipping. Dispose of soaked absorbent material in

accordance with Federal, State and local laws.

WASTE DISPOSAL METHOD: Aerosol cans, when emptied and depressurized through normal use, pose no disposal hazard and should be recycled. Consult Federal, State

and local authorities for approved procedures.

and local authorities for approved procedures.

Aerosol cans, when emptied and depressurized through normal use, pose no disposal hazard and should be recycled. Consult Federal, State

and local authorities for approved procedures.

N/A= NOT APPLICABLE · N/E=NOT ESTABLISHED · N/D=NOT DETERMINED · <=LESS THAN · >=MORE THAN

NOTICE: The information contained on this Material Safety Data Sheet is considered accurate as of the date of publication. It is not necessarily all inclusive nor fully adequate in every circumstance.

The suggestions should not be confused with, nor followed in violation of applicable laws, regulations, rules or insurance requirements. No warranty, express or implied, of merchantability, fitness,

accuracy of data, or the results to be obtained from the use thereof is made. The vendor assumes no responsibility for injury or damages resulting from the inappropriate use of this product.

The suggestions should not be confused with, nor followed in violation of applicable laws, regulations, rules or insurance requirements. No warranty, express or implied, of merchantability, fitness,

accuracy of data, or the results to be obtained from the use thereof is made. The vendor assumes no responsibility for injury or damages resulting from the inappropriate use of this product.

The information contained on this Material Safety Data Sheet is considered accurate as of the date of publication. It is not necessarily all inclusive nor fully adequate in every circumstance.

The suggestions should not be confused with, nor followed in violation of applicable laws, regulations, rules or insurance requirements. No warranty, express or implied, of merchantability, fitness,

accuracy of data, or the results to be obtained from the use thereof is made. The vendor assumes no responsibility for injury or damages resulting from the inappropriate use of this product.

MSDS -GRAFFITI  GRABBER

Date Prepared: January 13, 2005

Prepared By: Stewart Holyk

Infotrac......................................(800) 535-5053

U.C.I. Poison Control................(714) 634-5988

GENERAL INFORMATION

Product Number

Product

NFPA RATING

0 = Non-Hazardous

I = Slight Hazard

2 = Hazardous

3 = Extreme Hazard

4 = Deadly

Graffiti Grabber

Winner Industrial Supply

3262 N.E. Street Unit #D

San Bernardino, CA 92405

PLL-1710

Hydrocarbon Blend

Combustible Liquid, NOS,

NA1993, PG111

Manufacturer

Chemical Family

FIRE

HEALTH

REACTIVITY

SPECIAL

1

DOT Classification

0

SECTION 2 - HAZARDOUS INGREDIENTS

Chemical Name CAS Number % By Vol. Exposure Limits in Air

ACGIH (TLV) OSHA (PEL)

Odorless Mineral Spirits 64742-48-9 24.00% 2 PPM 2 PPM

D-lemonine 98% 5989-27-5 10.00% 150 PPM 150 PPM

2-Methyl Pyridone 7732-18-5 35.00% 100 PPM 100 PPM

SECTION 3 - HEALTH HAZARD DATA

Effects of Overexposure

Skin:

Eyes:

Ingestion:

Inhalation:

When the concentrated form of this product comes in contact with the skin it may cause severe irritation and / or damage to the skin. There is also the possibility of defatting of the skin due to the removal of the skins natural oils.

When this product comes in contact with the eyes or eyelids it may cause severe irritation and / or damage to the eyes and immediate areas.

When concentrated solutions of this product are swallowed severe discomfort and / or damage of the stomach and intestinal tract may occur.

Fumes from this product are generally considered non -toxic, and pose no safety or health threat.

First Aid Procedures

Skin:

Eyes:

Ingestion:

Inhalation:

If skin comes in contact with product: Flush exposed area with cool water for 15 minutes. Consult a physician if irritation persists.

If this product comes in contact with eyes; flush eyes with luke warm water for 30 minutes and consult a physician if irritation persists.

DO NOT INDUCE VOMITING. Have patient drink large amounts of milk or plain water. Consult a physician immediately.

Remove to clean atmosphere and consult physician immediately

Carcinogens

The hazardous ingredients contained in this product are NOT listed on the following regulatory lists of suspected carcinogens:

Federal OSHA, National Toxicology Program (NTP), International Agency for Reasearch on Cancer (IARC), State of California - OSHA

SECTION 4 - SPILL, LEAK, AND DISPOSAL PROCEDURES

Spill and Leak Control

Small Spill / Leaks:

Large Spill / Leaks:

Flush area with water to an industrial sewer line.

Contain spill with dikes of absorbant mateirals such as clay, sand, or vermiculate. This material is considered hazardous in concentrated form.

Waste Disposal

All hazardous waste must be solidified and disposed of in an EPA approved class one disposal facility. When disposing of chemicals contact local, state, and federal environmental agencies to fully understand the necessary regulations governing the disposal of chemical wastes.

 

SECTION 5 - FIRE AND EXPLOSION HAZARDS

Flashpoint :

Testing Method:

178

Cleveland Closed Cup

Flammable Limits in Air:

Combustible

Upper Explosion Limits:

Lower Explosion Limits:

12.0 Percent

8.0 Percent

Fire Extinguishing Materials:

Water, Sand, CO2, Dry Foam, Halon

Special Fire Fighting Materials:

None

Unusual Fire & Explosion Hazards:

None

Hazardous Polymerzation:

Under fire conditions hazardous polymerzation will not oc

SECTION 6 - PHYSICAL DATA

SECTION 5 - FIRE AND EXPLOSION HAZARDS

Boiling Point:

Vapor Pressure:

Vapor Density:

pH (Concentrate):

Specific Gravity: (Water = 1.00):

Percent Volatiles:

Evaporation Rate (Water = 1.00):

pH (1% Solution):

212 o F

Not Appl.

Not Appl.

N / A

1.04

100.0%

1.04

N/A

Solubility in Water:

Appearance and Odor:

This product is emulisifble in water.

Clear liquid with a hydrocarbon odor.

SECTION 7 - PERSONAL PROTECTION INFORMATION

Respiratory Protection:

Eye Protection:

Protective Gloves:

Other Equipment:

None Required

When handling any chemical product it is recommended that proper protection of the eyes be worn.

When handling any chemical product it is recommended that proper protection of the skin and hands be worn.

None

SECTION 8 - SPECIAL PRECAUTIONS

Chemicals can be hazardous if not respected. The use of proper equipment and procedures for handling chemicals are not only of benefit for their obvious uses, but can reduce the possibility of serious injury and lost time accidents.

Keep this material away from high heat and observe proper housekeeping procedures.

DO NOT mix chemcials unless instructed by qualified personnel.

SECTION 9 - FOOTNOTES

Sources:

1) Dangerous Properties of Industrial Materials; Sax , 6th Edition

2) Handbook of Toxic and Hazardous Chemicals and Carcinogens; Sittig, 2nd Edition

3) Condensed Chemical Dictionary; Hawley, 10th Edition

4) TLV’s and Biological Exposure Indices for 1985-1986; ACGIH, 2nd Printing

5) Director’s List of Hazardous Substances; State of California, 1st Printing

6) Title 29 CFR parts 1900 to 1910, Revised as of July 1,1984

7) Documentation of TLV’s and BEI’s; ACGIH, 5th Edition

8) Guidelines for the selection of Chemical Protective Clothing; ACGIH, 2nd Printing

9) Emergency Response Guidebook; U.S. Department of Transportation, 1984 Edition

This data is furnished gratuitously independent of sale of the product and only for your investigation and independent verification. While this data is believed to be correct, WINNER INDUSTRIAL SUPPLY shall in no event be responsible for damages whatsoever, directly or indirectly, resulting from the publication or use of or reliance upon data contained herein. No warranty, either implied or expressed, or merchantability of fitness or of any nature with respect to the product or to the data is made herein. You are urged to obtain data sheets for all WINNER INDUSTRIAL SUPPLY products you buy, process, use, or distribute, and are encouraged to advise anyone working with or exposed to such products of

MSDS             SAFE ERASE GRAFFITI TOWELS

WINNER INDUSTRIAL CHEMICAL & TOOL SUPPLY INC.

3262 NORTH (E) STREET  UNIT D

SAN BERNARDINO,CALIF. 92405

GENERAL INFORMATION NUMBER: 877-597-6261 REVISION DATE: May 9, 2006

CHEMTREC: (800) 424-9300 DATE OF ISSUE: May 12, 2006

I - Product Identification

SAFE ERASE GRAFFITI TOWELS

PRODUCT CODE: 1447

CHEMICAL FORMULATION: Premoistened graffiti and paint removal towel.

NFPA HAZARD IDENTIFICATION SYSTEM: HEALTH: 1 FLAMMABILITY: 1 REACTIVITY: 0

HAZARD RATING: 4 - Extreme; 3 - High; 2 - Moderate; 1 - Slight; 0 - Insignificant

II - Hazardous Ingredients

Values reported as TWA unless noted.

EPA 40 CFR:

SUBSTANCE

APPROX

%

OSHA

PEL

ACGIH

TLV 302 355 372

CAS #

Dimethyl Glutarate 50.0-60.0 N/E N/E N N N 1119-40-0

n-Methyl Pyrrolidone 15.0-25.0 N/E N/E N N Y 872-50-4

Dimethyl Succinate 15.0-25.0 N/E N/E N N N 106-65-0

Dimethyl Adipate 5.00-15.0 N/E N/E N N N 627-93-0

Linear alcohol ethoxylate < 3.00 N/E N/E N N N 34398-01-1

Key: PEL: Permissible Exposure Limit TLV: Threshold Limit Value C: Ceiling level STEL: Short Term Exposure Limit

N/A: Not Applicable N/D: Not Determined N/E: Not Established Y: Yes N: No

302: CERCLA List of Hazardous Substances and Reportable Quantities (40 CFR 302.4).

355: SARA TITLE III / List of Extremely Hazardous Substances for Emergency Planning and Notification (40 CFR 355).

372: SARA TITLE III / List of Toxic Chemicals subject to Release Reporting (Community Right to Know) (40 CFR 372).

III - Physical Data

BOILING POINT (°F): N/A SPECIFIC GRAVITY (WATER = 1): 1.08*

VAPOR PRESSURE (mm Hg): N/D VOC CONTENT (% by weight): 15.0-20.0*

VAPOR DENSITY (AIR = 1): N/D EVAPORATION RATE (WATER = 1): N/D

SOLUBILITY IN WATER: Negligible* pH: N/A

APPEARANCE AND ODOR: Purple cloth impregnated with a clear, water-white liquid; mild odor.

*Tested using the liquid component of the towelette.

IV - Fire and Explosion Hazard Data

FLASH POINT (°F): > 200* (TEST METHOD): Closed cup

FLAMMABLE LIMITS IN AIR (VOLUME %) UPPER: N/A LOWER: N/A

EXTINGUISHING MEDIA: Water, foam, carbon dioxide, dry chemical.

SPECIAL FIRE FIGHTING PROCEDURES: Cool fire exposed containers with water fog. Firefighters should be equipped with full

protective gear including self-contained breathing apparatus.

UNUSUAL FIRE AND EXPLOSION HAZARD: None

PRODUCT NAME: Graffiti Wipes PRODUCT CODE: 1447

V - Reactivity Data

STABILITY: Stable

INCOMPATIBILITY: Oxidizers, strong acids and alkalis.

CONDITIONS TO AVOID: Excess heat and open flame.

HAZARDOUS DECOMPOSITION PRODUCTS: Thermal decomposition may produce oxides of carbon.

HAZARDOUS POLYMERIZATION: Will not occur.

CONDITIONS TO AVOID: None.

VI - Health Hazard Data

ROUTES OF ENTRY INHALATION: EYE CONTACT: X SKIN CONTACT: X INGESTION:

INGREDIENTS THAT ARE CONSIDERED BY OSHA, NTP, IARC TO BE SUSPECTED HUMAN CARCINOGENS: None

EFFECTS OF OVEREXPOSURE

IF IN EYES: Mild irritation and redness.

IF ON SKIN: Redness, dryness and irritation, with prolonged or repeated exposure.

IF SWALLOWED: Gastrointestinal irritation, nausea, cramps, vomiting.

IF INHALED: Irritation to upper respiratory tract.

EMERGENCY AND FIRST AID PROCEDURES

IF IN EYES: Flush eyes and under eyelids with plenty of cool water for at least 15 minutes. If irritation persists, obtain medical

attention.

IF ON SKIN: Wash with soap and water. If irritation persists, obtain medical attention.

IF SWALLOWED: Contact physician or poison control center immediately. Give affected person one to two glasses of water. Do not

induce vomiting. Never give anything to an unconscious person.

IF INHALED: Remove person to fresh air.

VII - Spill or Leak Protection

STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Soak up spilled material with inert absorbent material and

place in a properly labeled closed container for disposal.

WASTE DISPOSAL METHOD: Consult local environmental authorities.

VIII - Special Protection Information

RESPIRATORY PROTECTION: Use with adequate ventilation.

VENTILATION LOCAL: Recommended MECHANICAL: Not required

PROTECTIVE GLOVES: Chemical resistant.

EYE PROTECTION: Safety glasses.

OTHER PROTECTIVE EQUIPMENT: None.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: Store in a cool, dry place. Keep container tightly closed when

not in use.

OTHER PRECAUTIONS: Keep out of reach of children.

IX - Transportation Information (ground transportation only)

DOT PROPER SHIPPING NAME: None

DOT CLASS: None DOT ID NUMBER: None DOT PACKING GROUP: None

The shipping information listed above applies only to non-bulk (< 119 gallons) containers of this product. This product may have more than one proper shipping

name depending on packaging, product properties, & mode of shipment. If any alteration of packaging, product, or mode of transportation is further intended,

different shipping names and labeling may apply.

Revision Date: May 9, 2006 Prepared by: Technical Dept. Date of Issue: May 12, 2006

This information contained herein is based on data considered accurate. However, no warranty is expressed or implied regarding the accuracy of this data or the

results to be obtained from the use thereof. Total Solutions assumes no responsibility for personal injury or property damage to the vendee, users or third parties

caused by the material such vendees or users assume all risks associated with the use of this material.

Safe Erase Gel

Winner Industrial Chemical & Tool Supply, Inc.

3262 North E street

San Bernardino,California

877-597-6261      Chemtrec 24 hr.#800-424-9300

MATERIAL SAFETY DATA SHEET

                                                                 

CHEMICAL NAME:  

SYNONYMS:                       

CHEMICAL FAMILY:

FORMULA:

MOLECULAR WEIGHT:

TRADE NAME AND SYNOMYMS:SAFE ERASE GEL

                                                                  

I.PHYSICAL DATA

                                                                   BOILING POINT, 760 mm.:>300oF.   

SPECIFIC GRAVITY (H20=1): 1.05

VAPOR DENSITY (air=1): n/a

PERCENT VOLATILES BY VOLUME: 

APPERANCE AND ODOR: Liquid, Citrus odor

FREEZING POINT: n/a

VAPOR PRESSURE AT 2Oo C. n/a

SOLUBILITY IN WATER % BY WT.: 100% Soluble

EVAPORATION RATE(butyl acetate=1): <.001

                                                                  

II. HAZARDOUS INGREDENTS

                                                                       MATERIAL                        %                TLV(Units)

No Ingredients used in this product is defined as Hazardous.

Contains no aromatic or aliphatic hydro-carbon solvents or ketones.

                                                                 

III. FIRE AND EXPLOSION HAZARD DATA

                                                                   FLASH POINT(test method):200oF.

FLAMMABLE LIMITS IN AIR,% BY (volume): n/a 

AUTOIGNITION TEMPERATURE: n/a

EXTINGUISHING MEDIA: Water, Dry Foam, Carbon Dioxide.

SPECIAL FIRE FIGHTING PROCEDURES: None

UNUSUAL FIRE AND EXPLOSION HAZARDS: None

                                                                  

IV. HEALTH HAZARD DATA

                                                                 

THRESHOLD LIMIT VALUE: None listed

EFFECTS OF OVEREXPOSURE: Possible skin rash. May damage eyes. 

EMERGENCY AND FIRST AID PROCEDURES: Wash eyes out with plenty of water. Wash hands with soap and water. If ingested drink plenty of water. Call Physician.

Safe Erase Gel

(continued)

                                                                   

V. REACTIVITY DATA

                                                                 

STABILITY:   UNSTABLE X STABLE

CONDITIONS TO AVOID: Heat, Spark, and Open Flame.

INCOMPATIBILITY (materials to avoid):

HAZARDOUS DECOMPOSITION PRODUCTS:

HAZARDOUS POLYMERIZATION:   MAY OCCUR X WILL NOT OCCUR

CONDITIONS TO AVOID: Heat, and Open Flame

                                                                  

VI. SPILL OR LEAK PROCEDURES

                                                                   STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: Wash with water.

WASTE DISPOSAL METHOD: According to Federal, State, and Local Regulations.

                                                                   

VII. SPECIAL PROTECTION INFORMATION

                                                                   RESPIRATORY PROTECTION(specify type):

VENTILATION:

     X  LOCAL EXHAUST

        MECHANICAL(general)

        SPECIAL

        OTHER

PROTECTIVE GLOVES: Chemical resistance Gloves.

EYE PROTECTION: Chemical resistance Goggles.

OTHER PROTECTIVE EQUIPMENT:

                                                                 

VIII. SPECIAL PRECAUTIONS

                                                                   PRECAUTIONARY LABELING:

OTHER HANDLING AND STORAGE CONDITIONS: Store at Room Temperature 70oF.-80oF. Keep away from Heat and Open Flame. Avoid Cool Temperatures of 60oF.or less.

Quick Strip MSDS

 =============================================================================
  MATERIAL SAFETY DATA SHEET (SUBSTITUTES FOR OSHA FORM 174): May be used to
  comply with OSHA's Hazard Communication Standard, 29 CFR 1910.1200.
 =============================================================================
  PRODUCT NUMBER: 558   
  IDENTITY: QUIK-STRIP            16A               Revision Date: 01/26/2007
 -----------------------------------------------------------------------------
 Section I
 -----------------------------------------------------------------------------
 Manufacturer's Name:WINNER INDUSTRIAL SUPPLY ^          Telephone Numbers:
 Address:            3262 NORTH E ST UNIT D              Emergency:
                                                         800/255-3924     
                     SAN BERNADINO                       Information:
                     State:  CA Zip Code:92405           877/597-6261     
 ------------------------------------------------------------------------------
 HMIS CODES: REACTIVITY:  2 FLAMMABILITY:  1 HEALTH:  2 PERSONAL PROTECT: B  

  Section II:  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION (All of the
  ingredients contained in this product are listed on the TSCA inventory.)
 ==============================================================================
 Name                           Cas No.    OSHA PEL   ACGIH TLV  OTHER LIM   %

 METHYL ALCOHOL           *    67-56-1    200        200        N/A        ___
 METHYLENE CHLORIDE       *+   75-09-2    25 PPM     25 PPM     N/A        ___
 PROPANE/N-BUTANE              68476-86-8 1000 PPM   600 PPM    N/A        ___
 ___________________________   __________ __________ __________ __________ ___
 ___________________________   __________ __________ __________ __________ ___
 ___________________________   __________ __________ __________ __________ ___
 ___________________________   __________ __________ __________ __________ ___
 ___________________________   __________ __________ __________ __________ ___
 ___________________________   __________ __________ __________ __________ ___
   Comment:
    THIS PRODUCT CONTAINS THE TOXIC CHEMICALS MARKED WITH AN * SUBJECT   
    TO THE REPORTING REQUIREMENTS OF SECTION 313 OF THE EMERGENCY PLANNING
    AND COMMUNITY RIGHT-TO-KNOW ACT OF 1986 AND OF 40CFR372.             

    ______________________________________________________________________
    ______________________________________________________________________
    ______________________________________________________________________

    THIS PRODUCT CONTAINS CHEMICAL(S) MARKED WITH A + KNOWN              
    TO THE STATE OF CALIFORNIA TO CAUSE CANCER.                          


  Section III:  PHYSICAL/CHEMICAL CHARACTERISTICS
 ==============================================================================
  Boiling Point:             104F     Specific Gravity (water=1)         1.23
  Vapor Pressure(mm Hg)      100      Melting Point:                  N/A   
  Vapor Density(AIR=1)       >1       Evaporation Rate:               >1    
  Solubility in Water:       15%      (Butyl Acetate=1)
  Appearance and Odor:  CLEAR SPRAY, CHLORINATED SOLVENT ODOR               

  Section IV:  FIRE AND EXPLOSION HAZARD DATA
 ==============================================================================
  Flash Point(Method Used):NONE       Flammable Limits:  LEL:N/A    UEL: N/A
  Extinguishing Media: CO2, FOAM, WATER, DRY CHEMICAL                        
  Special Fire Fighting Procedures: SELF CONTAINED BREATHING APPARATUS.      
                                                                             
                                                                             
  Unusual Fire and Explosion Hazards: CONTENTS UNDER PRESSURE.               
  EXPOSURE TO TEMPERATURES ABOVE 120 F MAY CAUSE BURSTING.                   
                                                                             

 


  Section V: REACTIVITY DATA                            PRODUCT NUMBER: 558  
 ==============================================================================
  Stability: Unstable:        Conditions to avoid:                          
             Stable:   X      TEMPERATURES ABOVE 120 F                      
  Incompatability (Materials to Avoid): SOME PLASTICS, PAINTED SURFACES     
                                                                            
  Hazardous Decomposition or Byproducts: NONE                               
                                                                            
  Hazardous Polymerization:       May Occur:             Will Not Occur: X  
  Conditions to Avoid: NONE KNOWN                                           
                                                                            

  Section VI:   HEALTH HAZARD DATA
 ==============================================================================
  Routes of Entry:       Inhalation: YES       Skin: YES       Ingestion:YES
  Health Hazards(Acute and Chronic):
  INHALATION: DIZZINESS. EXCESSIVE EXPOSURE MAY CAUSE UNCONSCIOUSNESS. EYES:
  IRRITATION, REDDENING. SKIN: IRRITATION. MAY CAUSE BURNS IF LEFT ON SKIN. 
  INGESTION: MAY CAUSE IRRITATION AND BURNING.                              
  Carcinogenicity: NTP:YES       IARC Monographs:Yes       OSHA Reg:YES     
  Signs and Symptoms of Exposure: SEE HEALTH HAZARDS                        
                                                                            
                                                                            
  Medical Conditions Generally Aggravated by Exposure: EXCESSIVE EXPOSURE   
  WILL AGGRAVATE RESPIRATORY, PULMONARY OR CARDIOVASCULAR ILLNESSES.        
                                                                            
  Emergency and First Aid Procedures: INHALATION: REMOVE TO FRESH AIR.      
  CONSULT PHYSICIAN. EYES: FLUSH EYES WITH WATER FOR 15 MINUTES. CONSULT    
  PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. CONSULT PHYSICIAN. INGESTION:  
  INDUCE VOMITING AND CONSULT PHYSICIAN OR POISON CONTROL IMMEDIATELY.      

  Section VII:   PRECAUTIONS FOR SAFE HANDLING AND USE
 ==============================================================================
  Steps to be Taken in Case Material is Released or Spilled: WIPE UP WITH   
  RAG OR USE SOME ABSORBENT CLAY MATERIAL.                                  
                                                                            
                                                                            
  Waste Disposal Method: DISPOSE OF RESIDUE IN ACCORDANCE WITH FEDERAL,     
  STATE AND LOCAL GUIDELINES. DO NOT PUNCTURE OR INCINERATE CONTAINER.      
  DO NOT REUSE EMPTY CONTAINER.                                             
                                                                            
  Precautions to be Taken in Handling and Storing: DO NOT STORE OR USE NEAR 
  HEAT OR OPEN FLAME. EXPOSURE TO TEMPERATURES ABOVE 120 F MAY CAUSE        
  BURSTING.                                                                 
  Other Precautions: N/A                                                    
                                                                            
                                                                            
  Section VIII:   CONTROL MEASURES
 ==============================================================================
  Respiratory Protection: USE WITH ADEQUATE VENTILATION                     
  Ventilation: Local Exhaust:ADEQUATE                                       
  Mechanical: N/A                         Special: N/A                      
  Other:        N/A                                                         
  Protective Gloves:CHEMICAL RESISTANT GLOVES ARE RECOMMENDED               
  Eye Protection: SAFETY GLASSES ARE RECOMMENDED WHENEVER CHAMICALS ARE USED.
  Other Protective Clothing or Equipment:
  N/A                                                                       
  Work/Hygienic Practices:
  WASH HANDS AFTER USE.